Camshaft Bearing

Camshaft Bearing (LH)





Tighten the bearing caps evenly in the order shown in several passes.
After adjusting the camshaft end play using the thrust caps 1L and 6L, tighten the other bearing caps.
Tightening torque 8.0 - 12.0 Nm (82 - 122 kgf.cm, 71 - 106 in.lbf)

Camshaft Bearing (RH)





Tighten the bearing caps evenly in several passes in the order shown.
After adjusting the camshaft end play using the thrust caps 1R and 5R, tighten the other bearing caps.
Tightening torque 8.0 - 12.0 Nm (82 - 122 kgf.cm, 71 - 106 in.lbf)