LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> Tribute 2WD V6-3.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair

Camshaft Position Sensor: Service and Repair

Removal and Installation

1. Disconnect the electrical connector.
2. Remove the CMP bolt.
3. Remove the CMP sensor.
4. Remove the O-ring.
5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals