Timing Components: Specifications

Tighten all bolts and studs in the order shown

Crankshaft Pulley Lock Bolt
Tighten the new crankshaft pulley lock bolt in four steps.
1)Tighten to 120 Nm 112.2 kgf-m, 88.5 ft. lbs.)
2)Loosen 360° (one full turn) in reverse order
3)Tighten to 47 - 53 Nm (4.8 - 5.4 kgf-m, 35 - 39ft.lbs.)
4)Tighten 85° - 95°