LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Abs HU/Cm Removal/Installation >> Notes

Abs HU/Cm Removal/Installation: Notes

CAUTION:
  • The internal parts of the ABS HU/CM could be damaged if dropped. Be careful not to drop the ABS HU/CM. Replace the ABS HU/CM if it is subjected to an impact.
  1. Remove the front suspension tower bar. (See FRONT SUSPENSION TOWER BAR .)
  2. Remove in the order indicated. See Fig 1.
  3. Install in the reverse order of removal.
    Fig 1: Removing/Installing ABS HU/CM
    G01344984Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals