LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> 3 L4-2.3L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> WDS Scan Tool

WDS Scan Tool

Active Command Modes Procedure





1. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector.
2. Turn the ignition switch to the ON position (engine off) or start the engine.
3. Activate active command modes using the WDS or equivalent.





Active Command Modes Table
scientia non olet · About LEMON Manuals