LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> Millenia V6-2.5L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Not Using SST (NGS Tester) >> At Battery Power Terminal Inspection

At Battery Power Terminal Inspection

1. Disconnect the PCM connector.
2. Turn the ignition switch to ON.
3. Measure the voltage between battery power terminal and ground.
- If it is not normal, repair the related harnesses.

Specification: B+
scientia non olet · About LEMON Manuals