LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> 929 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> System Testing >> Retrieving Fault Codes

Retrieving Fault Codes

  1. Turn ignition on. Turn main switch on. Ensure cruise indicator light illuminates. If cruise indicator light does not illuminate, repair before continuing.
  2. Activate RESUME switch for at least 3 seconds. Cruise indicator light will illuminate for 3 seconds, then go out for 2 seconds. After this, light will flash codes (if stored). See FAULT CODE DIRECTORY. If no fault codes are stored, light will not flash. To exit self-diagnostics, drive vehicle at a speed greater than 10 MPH or turn main switch off. Ensure cruise indicator goes out.
scientia non olet · About LEMON Manuals