LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> MX-3 V6-1844cc 1.8L DOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair

Engine Control Module: Service and Repair

Removing/Installing ECU:






1. Disconnect negative battery cable
2. Remove side covers on each side of center console beneath the dash.
3. Remove ECU mounting bolts and nuts.
4. Unplug ECU connectors.
5. Install new ECU in reverse order of removal.

scientia non olet · About LEMON Manuals