LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1991 >> RX7 2RTR-1308cc 1.3L MFI >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Control Module >> Testing and Inspection

Control Module: Testing and Inspection


1. With ignition switch "ON," check EC-AT control unit terminal voltages, referring to terminal voltage chart. Control unit is behind right side kick panel.
2. If not correct, check and replace or repair defective component(s) and/or wiring.
3. If voltages are not correct and no other cause is detected, replace control unit.

TERMINAL VOLTAGE CHART

Part 1

Terminal Voltage Chart (Part 1):






Part 2

Terminal Voltage Chart (Part 2):




scientia non olet · About LEMON Manuals