Brake System - General Information
- Specifications
- Description And Operation
- Diagnostic Tests
- Brake System
- Notes
- Principles of Operation
- Inspection and Verification - Hydraulic Brake System
- Symptom Chart - Brake System
- Symptom Chart - Noise, Vibration and Harshness (NVH)
- Inspection and Verification - Adjustable Pedals Without Memory Feature
- Symptom Chart - Adjustable Pedals Without Memory Feature
- Inspection and Verification - Adjustable Pedals With Memory Feature
- Symptom Chart - Adjustable Pedals With Memory Feature
- Pinpoint Tests
- Pinpoint Test A: The Red Brake Warning Indicator is Illuminated and the Yellow ABS Warning Indicator is Not Illuminated
- Pinpoint Test B: Adjustable Brake Pedal is Inoperative/Does Not Operate Correctly (System Without Memory Feature)
- Pinpoint Test C: Adjustable Brake Pedal Does Not Operate Correctly - Using the Adjustable Pedal Switch (System with Memory Feature)
- Pinpoint Test D: Adjustable Brake Pedal Does Not Operate Correctly - Using the Memory SET Switch or the Remote Transmitter
- Pinpoint Test E: DTCs B1987, B1990 and B1991 - Pedal Forward/Rearward Motor Stalled, Potentiometer Feedback Circuit Failure and Short to Battery
- Pinpoint Test F: Vibration When the Brakes are Applied
- Component Tests
- Brake System
- General Procedures