LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2000 >> LS 3.0 S, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock/Traction Control/Stability Assist >> Removal & Installation >> Anti-Lock Brake Control Module >> Removal & Installation

Removal & Installation

  1. Ensure ignition is off. Disconnect negative battery cable. Disconnect ABCM electrical connector by lifting up on release tab. Release underhood Auxiliary Junction Box (ABJ). Position ABJ aside. Remove ABCM retaining bolts and ABCM.
  2. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals