Transmission Position Sensor/Switch: Adjustments

A760E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT

1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Loosen the bolt of the park/neutral position switch and move the shift lever to N.





Text in Illustration





(b) Align the groove and the neutral alignment mark line.

(c) Hold the switch in position and tighten the bolt.

Torque : 13 Nm (133 kgf-cm, 9 ft-lbf)

(d) After adjustment, perform the inspection Initial Inspection and Diagnostic Overview.