Installation

3UR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL VVT SENSOR





(a) Install the 4 sensors with the 4 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the 4 sensor connectors.





2. INSTALL CAMSHAFT POSITION SENSOR
(a) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the sensor connector.
3. INSTALL AIR CLEANER HOSE ASSEMBLY Installation
4. INSTALL V-BANK COVER SUB-ASSEMBLY Installation
5. INSTALL UPPER RADIATOR SUPPORT SEAL Installation
6. INSTALL ENGINE ROOM SIDE COVER RH Installation
7. INSTALL ENGINE ROOM SIDE COVER LH Installation