Ignition System: Service and Repair

REMOVAL

1. REMOVE ENGINE UNDER COVER NO.2
a. w/ engine under cover No. 2.
1. Remove the clip, 2 screws and 2 bolts
2. Slide the engine under cover No. 2 toward the rear to detach it from the retainers, and then remove the engine under cover No. 2.







2. REMOVE AIR CLEANER INLET NO.2
3. REMOVE AIR CLEANER ASSEMBLY
4. REMOVE VVT SENSOR
a. Disconnect the 2 VVT sensor connectors.
b. Remove the 2 bolts, and then remove the 2 VVT sensors.