Rear Speed Sensor: Installation

WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SPEED SENSOR REAR LH
1. Install the speed sensor rear with the bolt.
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  NOTE: Prevent foreign matter from attaching to the sensor tip.
2. Connect the speed sensor connector.
  
  Fig 1: Inspecting Speed Sensor Rear
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR WHEEL
1. Install the rear wheel.
  Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
INSPECT SPEED SENSOR SIGNAL
(See TEST MODE PROCEDURE )