Timing Belt Tensioner

DIMENSIONS
Push Rod Protrusion 8.0-8.8 mm (0.315-0.346 inch)

TIGHTENING SPECIFICATIONS
Idler Pulley Mounting Bolt 34 Nm (350 kg. cm., 25 ft. lbs.)
Tensioner Mounting Bolts 26 Nm (270 kg. cm., 20 ft. lbs.)
Timing Belt Plate 7.8 Nm (80 kg. cm., 69 inch lbs.)

NOTE: Use Loctite 242 or equivalent on idler pulley mounting bolt.