Radiator Cooling Fan Control Module: Service and Repair

Control Unit - Radiator Cooling Fan

Service Repair No - 26.25.43

Remove
1. Disconnect battery earth lead.





2. Release multiplugs from clips and disconnect 2 body harness multiplugs.
3. Disconnect multiplug from LH cooling fan and release harness from 4 retaining clips.
4. Disconnect multiplug from RH cooling fan and release harness from 2 retaining clips.
5. Remove screw securing control unit.
6. Release control unit from fan cowl.

Refit
1. Carefully position control unit in cowl and secure with screw.
2. Connect body harness multiplugs and secure to cowl.
3. Secure LH and RH harness to retaining clips and connect multiplugs.
4. Connect battery earth lead.