LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Engine Control System - 2.0L) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the mounting nuts (B).
    G11955545Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the cap (A)
    G11955546Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the mounting bolt (A), and then remove the accelerator pedal module.
    G11955547Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals