LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair procedures >> Removal >> Passenger Power Window Switch

Passenger Power Window Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear door trim panel.

    (Refer to Body - "REAR DOOR ")

  3. Disconnect the connector from the power window switch module.
    Fig 1: Disconnecting Connector From Power Window Switch Module
    G11786062Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power window switch module (A) from the door trim after loosening the mounting screws (13EA).
    Fig 2: Removing Power Window Switch Module From Door Trim Mounting Screws
    G11786063Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the module (A) from the sub box assembly after loosening the mounting screw (3EA).
    Fig 3: Removing Module From Sub Box Assembly Mounting Screw
    G11786064Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals