LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Sorento Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System - 3.5L) >> VCM Position Sensor >> Repair procedures >> Inspection

Repair procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check the signal waveform of the VCM position sensor using the GDS.
    NOTE: In order to operate VCMA, use the actuator test function in the GDS.

    Specification: Refer to "WAVE FORM "

scientia non olet · About LEMON Manuals