LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Sorento Base, A5SR2 >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Crash Pad >> Repair Procedures >> Replacement >> Heater Control Unit Replacement

Heater Control Unit Replacement

  1. Remove the side garnish.
  2. After loosening the heater control mounting screw, remove the heater control unit (A).
    Fig 1: Identifying Heater Control Unit With Screws
    G06410521Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the connector (A).
    Fig 2: Identifying Heater Control Unit Connector
    G06410522Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in properly.
scientia non olet · About LEMON Manuals