LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Crash Pad >> Repair Procedures >> Replacement >> Heater Control Unit Replacement

Heater Control Unit Replacement

  1. Remove the center fascia panel.
  2. After loosening the heater control mounting screws, remove the heater control unit (A).
    Fig 1: Identifying Heater Control Unit With Mounting Screws
    G06385329Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal.
    NOTE: Make sure the connector is plugged in properly
scientia non olet · About LEMON Manuals