LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> Problem Symptoms Table >> ABS Does Not Operate >> Inspection Procedures >> Check The Power Source Circuit

Check The Power Source Circuit

  1. Disconnect the connector from the ABS control module.
  2. Turn the ignition switch ON, measure the voltage between terminal 4 of the ABS control module harness side connector and body ground.

    Specification : approximately B+

    Is the voltage within specification?

    YES 

    • Check the ground circuit.

    NO 

    • Check the harness or connector between the fuse (10A) in the engine compartment junction block and the ABS control module. Repair if necessary.
      Fig 1: Measuring Voltage Between Terminal 4
      G05187498Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals