LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2003 >> Sedona EX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Components >> Cruise Control Module >> Installation

Cruise Control Module: Installation

  1. Position control module on control module bracket.
  2. Install three bolts.

    Tighten three bolts to: 5.1~9.4 lb°Ft (7~13 N.m, 0.7~1.3 kg-m)

  3. Position control module bracket.
  4. Secure control module bracket to body using three bolt.

    Tighten three bolts to: 15.2~26.8 lb°Ft (21~36 N.m, 2.1~3.7 kg-m)

  5. Connect control module connector.
  6. Connect control cable.
  7. Connect battery negative cable.
scientia non olet · About LEMON Manuals