LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee Trailhawk >> Repair and Diagnosis >> Suspension >> Front Suspension & Wheel Alignment >> Wheel Alignment >> Standard Procedure >> Wheel Alignment >> Toe >> Rear Toe

Rear Toe

NOTE:

Perform the following at each rear wheel as necessary.

  1. While holding the cam bolt head stationary, loosen the spring link mounting cam bolt nut.
  2. Rotate the cam bolt head left or right until the rear wheel toe for that rear wheel is set to the preferred specification. Refer to WHEEL ALIGNMENT, TECHNICAL SPECIFICATIONS .
  3. While holding the cam bolt head stationary, tighten the spring link mounting cam bolt nut to specifications. Refer to WHEEL ALIGNMENT, TECHNICAL SPECIFICATIONS .
scientia non olet · About LEMON Manuals