LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Compass Limited, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Plug, Glow >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the glow plug and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Connect the glow plug wire harness connectors.
  3. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals