LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Electronic Control Modules (Service Information) - Mp) >> Module, Radio Receiver >> Module Programming >> Program The Radio

Program The Radio

WARNING: This page is about a different car, the 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the scan tool.
  2. Check vehicle for DTCs.
  3. Clear all stored DTCs.
  4. Turn the ignition OFF, then ON and confirm DTCs are gone.
  5. Go to BCM >> Misc. Functions >> Proxi Alignment.

If required, continue to programming the next module.

scientia non olet · About LEMON Manuals