Sentry Key Transponder Programming: Notes

NOTE: Large metallic objects or devices, such as the Mobil Speed Pass(tm), that are near or around transponder keys may cause starting problems. If a starting problem occurs, ensure all objects on key ring are moved away from transponder key, and restart vehicle.

All Sentry Keys included with the vehicle are pre-programmed to work with the Sentry Key Immobilizer System (SKIS) when it is shipped from the factory. The Sentry Key Immobilizer Module (SKIM) can be programmed to recognize up to a total of 8 Sentry Keys. When programming a blank Sentry Key transponder, the key must first be cut to match the ignition switch lock cylinder for which it will be used. Once the additional key has been cut, the SKIM must be programmed to recognize it as a valid key.

There are two possible methods, to program the SKIM to recognize a new or additional valid key, the Secured Access Method and the Customer Learn Method.