LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2000 >> Grand Cherokee 2WD V8-4.7L VIN N >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Engine Torque Specifications >> Crankshaft Main Bearing

Crankshaft Main Bearing










Install the bedplate retaining bolts, making sure to place the stud bolts in the correct location, Torque the bolts in the sequence shown.

- Tighten bolts A - L to 54 Nm (40 ft. lbs.)
- Tighten bolts 1-10 to 2.8 Nm (25 in. lbs.)
- Turn bolts 1-10 an additional 90°.
- Tighten bolts A1 - A6 to 27 Nm (20 ft. lbs.)
scientia non olet · About LEMON Manuals