Lamps Test

Lamps Test
This test is conducted to check MIL, Up Shift Lamp, Low Fuel Lamp, Reduced Power Lamp and Cruise Control Lamp for its working.

Tech 2 must be used for this test.

Test Procedure:
1. Connect Tech 2 to the vehicle DLC.
2. Run the Engine at idle.




3. Select F3: Miscellaneous Test in the Application Menu.




4. Select F0: Lamps Test in the Miscellaneous Test.




5. Select F0: Malfunction Indicator Lamp.
6. Push "On" soft key.
7. Make sure Lamp illuminates.
8. If lamp illuminates, the Lamp is operating correctly




9. Select F2: Up Shift Lamp
10. Push "On" of soft key.
11. Make sure Lamp illuminates.
12. If Lamp illuminates, the Lamp is operating correctly.




13. Select F2: Low Fuel Lamp
14. Push "On" of soft key.
15. Make sure Lamp illuminates.
16. If Lamp illuminates, the Lamp is operating correctly.




17. Select F3: Reduced Power Lamp
18. Push "On" of soft key.
19. Make sure Lamp illuminates.
20. If Lamp illuminates, the Lamp is operating correctly.




21. Select F5: Cruise Control Lamp
22. Push "On" of soft key.
23. Make sure Lamp illuminates.
24. It Lamp illuminates, the Lamp is operating correctly.