Steering Column

TIGHTENING SPECIFICATIONS
Bulkhead Connector Screw 6 Nm (53 inch lbs.)
Intermediate Shaft Seal Screws 3 Nm (27 inch lbs.)
Lower Column Trim Cover Screws 6 Nm (53 inch lbs.)
Lower Intermediate Shaft Rag Joint Bolt 35 Nm (25 ft. lbs.)
Mounting Nuts 30 Nm (22 ft. lbs.)
Shift Lever to Screw 22 Nm (16 ft. lbs.)
Upper Column Trim Cover Screws 1.4 Nm (12 inch lbs.)