LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> EX35 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Periodic Maintenance >> Transfer Fluid >> Inspection >> Fluid Level

Fluid Level

  1. Remove filler plug (1) and gasket. Then check that fluid is filled up from mounting hole for the filler plug.
    CAUTION: Never start engine while checking fluid level.
  2. Set a new gasket onto filler plug, and install it on transfer and tighten to the specified torque. Refer to "EXPLODED VIEW ".
    CAUTION: Never reuse gasket.
    Fig 1: Checking Fluid Level From Filler Plug Mounting Hole
    G08194990Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals