LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> M45 >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P1121: Electric Throttle Control Actuator >> DTC Confirmation Procedure >> Procedure For Malfunction C >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00796227Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Set selector lever to D position and wait at least 3 seconds.
  4. Set selector lever to N or P position.
  5. Start engine and let it idle for 3 seconds.
  6. If DTC is detected, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About LEMON Manuals