LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2022 >> Kona N >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1/Intake]

[Bank 1/Intake]

  1. Disconnect the battery (-) terminal.
  2. Remove the air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the camshaft position sensor connector (A).
  4. Remove the installation bolt (B), and then remove the sensor.
G16186147Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals