LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra GT Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 1.6L) >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Inspection >> Notes

Repair Procedures: Inspection: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the IATS connector.
  3. Measure resistance between the IATS terminals 3 and 4.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATIONS "

scientia non olet · About LEMON Manuals