LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra GT Base, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Ignition Switch >> Repair Procedures >> Installation

Repair Procedures: Installation

CAUTION:
  • Do Not reuse the Shear Bolts.
  • When installing the new Shear Bolts to the Ignition Switch Assembly, tighten the Shear Bolts until its head is cut-off.
  1. Install the Key Warning Switch.
  2. Connect the Ignition Switch Connector after install the Ignition Switch.
  3. Install the Steering Column Shrouds Panel.
  4. Install the Driver Crash Pad Lower Panel.
  5. Connect the Negative (-) Battery Terminal
scientia non olet · About LEMON Manuals