LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Smart Key System >> Smart Key Unit >> Repair Procedures >> Removal >> Smart key unit

Smart key unit

  1. Disconnect the negative (-) battery terminal.
  2. Remove the glove box housing.

    (Refer to "GLOVE BOX HOUSING ").

  3. Remove the smart key unit (A) with loosening bolt and nut, then disconnect the connector.
    Fig 1: Removing Smart Key Unit With Bolt And Nut
    G12076575Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals