LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Remove the front driveshaft.

    (Refer to Driveshaft Assembly - "Front Driveshaft ")

  2. Remove the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ Joint ")

  3. Using a pillar or flat-tipped(-) screwdriver, remove the both side of clamp (B) of the dynamic damper (A).
    Fig 1: Removing Both Side Of Clamp Of Dynamic Damper
    G12089274Courtesy of HYUNDAI MOTOR AMERICA
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fixing Driveshaft With Vice
    G12089275Courtesy of HYUNDAI MOTOR AMERICA
  5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
  6. Separate the dynamic damper (A) from the shaft (B) carefully.
Fig 3: Separating Dynamic Damper From Shaft
G12089276Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals