LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
  2. Install the dynamic damper (A).
  3. Using the SST (09495-3K000), secure the dynamic damper bands (B).
    Fig 1: Installing Dynamic Damper
    G12089277Courtesy of HYUNDAI MOTOR AMERICA
  4. Install the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ Joint ")

  5. Install the front driveshaft.

    (Refer to Driveshaft Assembly - "Front Driveshaft ")

scientia non olet · About LEMON Manuals