LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L GDI >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the Canister Close Valve Connector (A).
  4. Disconnect the Ventilation Hose (B) from the Fuel Tank Air Filter and Canister Close Valve.
  5. Remove the Fuel Tank Air Filter Assembly after removing Bolts (C).
    Fig 1: Canister Close Valve Connector, Ventilation Hose And Bolts
    G10607994Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the Lever (A), and then separate the Canister Close Valve (B) from the Fuel Tank Air Filter (C) after rotating it in the direction of the arrow in the figure.
    Fig 2: Rotating Lever
    G10607995Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Fuel Tank Air Filter And Canister Close Valve
    G10607996Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals