LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from the steering column.
    Fig 1: Ignition Switch And Key Warning Switch Terminal Identification
    G10244354Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
    Fig 2: Ignition Switch Continuity Reference Chart
    G10244355Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals