LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Tucson GL, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (4WD Control System) >> 4WD Ecu >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Remove the lower panel. (Refer to CRASH PAD ).
  2. Remove the IPM. (Refer to ICM (INTEGRATED CIRCUIT MODULE) RELAY BOX ).
  3. Remove the parking brake pedal. (Refer to PARKING BRAKE SYSTEM ).
  4. Remove the 4WD ECU (C) after removing the nut (A-2ea) and the connector (B).

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 1: Identifying 4WD ECU, Harness Connector And Mounting Nuts
    G06875101Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals