LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Tucson GL, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the heater & A/C controller from center fascia panel.

    (Refer to CONTROLLER .)

  3. Remove the front seat heater switch assembly.

    (Refer to FRONT SEAT .)

  4. Remove the right air vent.

    (Refer to REAR GLASS DEFOGGER .)

  5. Loosen the nut and bolt from BCM.
    Fig 1: Identifying BCM Nut And Bolt
    G06873652Courtesy of HYUNDAI MOTOR CO.
  6. Insert the hand to right air vent hole to disconnect the BCM connectors.

    And then remove the BCM (A) from the heater & A/C controller hole.

    Fig 2: Removing BCM
    G06873653Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals