LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Genesis 5.0 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> [Bank 1/Sensor 2]

[Bank 1/Sensor 2]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the heated oxygen sensor connector (B).
  3. Lift the vehicle.
  4. Remove the heated oxygen sensor (A).
    Fig 1: Identifying Heated Oxygen Sensor And Connector (Bank 1/Sensor 2)
    G08822886Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals