LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Genesis 3.8 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (Tb-65/60N) >> Troubleshooting For DTC >> U0122 Lost Communication With Vehicle Dynamics Control Module >> Terminal and Connector Inspection

Terminal and Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES 

    NO 

    • Go to "SIGNAL CIRCUIT INSPECTION" procedure.
scientia non olet · About LEMON Manuals