LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Entourage Limited >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> BCM (Body Control Module) >> DTC B2533 Assist Courtesy Lamp Error >> Monitor DTC Status

Monitor DTC Status

  1. Connect scantool to Data Link Connector (DLC).
  2. Ignition "ON" & engine "OFF".
  3. Select "Diagnostic Trouble Codes (DTCs)"mode and monitor "DTC Status" parameter.
  4. Is the DTC B2533 present?

    YES 

    Go to "Inspection and Repair " procedure.

    NO 

    Fault is intermittent caused by poor contact in the sensor's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.