Component Inspection
1. Heat the sensor by submerging it in hot engine coolant.
2. Check that the resistance is within the specified range.
Resistance:
At 20°C (68°F): 2.21 - 2.69 K ohms
At 80°C (176°F): 264 - 328 ohms
1. Heat the sensor by submerging it in hot engine coolant.
2. Check that the resistance is within the specified range.
Resistance:
At 20°C (68°F): 2.21 - 2.69 K ohms
At 80°C (176°F): 264 - 328 ohms