LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H3 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - DTC P0013 To DTC P0315 >> DTC P0013 >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the Camshaft Position Actuator Solenoid Valve.
  2. Test for 5-13 Ω between the control terminal A and the low reference circuit terminal B of the Camshaft Position Actuator Solenoid Valve.
    • If not within the specified range, replace the Camshaft Position Actuator Solenoid Valve.
  3. Test for infinite resistance between each terminal and the Camshaft Position Actuator Solenoid Valve housing.
    • If not the specified value, replace the Camshaft Position Actuator Solenoid Valve.
scientia non olet · About LEMON Manuals