LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Generator Bracket & Bolts
    GM847280Courtesy of GENERAL MOTORS CORP.
  1. Install the generator bracket.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the generator bracket bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the power steering pump. Refer to Power Steering Pump Replacement .
  4. Install the generator. Refer to Generator Replacement .
    5. Fig 2: View Of Battery Cable Junction Block Bracket & Bolts
    GM759636Courtesy of GENERAL MOTORS CORP.
  5. Install the battery cable junction block bracket bolts.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

scientia non olet · About LEMON Manuals