LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the lumbar switch to the power seat switch bezel.
    2. NOTE: Refer to Fastener Notice .
  2. Install the lumbar switch screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 1: View Of Lumbar Switch & Power Seat Switch Bezel
    GM409526Courtesy of GENERAL MOTORS CORP.
  3. Install the power seat switch bezel (1) to the seat. Refer to Seat Switch Bezel Replacement .
scientia non olet · About LEMON Manuals